Chapter Log

Step 1 - Trimming Blocks and Cutting Cores
Status: Completed 
Est Time: 0.00, Actual: 0.00
Est Cost: $ 0.00, Actual: $ 1917.00
Date Completed: 02/05/2006

Dennis Oelmann will from time to time produce a canard and/or various other parts for the Cozy. He does fabulous work, and money was available at just the right time. I shipped him my Brock parts (luckily I had bought those before they went out of business), and he turned out my canard and elevator much more quickly than I could have done. I've only peeked through one end of the crate, but they're absolutely beautiful - certainly better work than I would have produced. The price was right, and the work was top-notch. If I did it all over again, I wouldn't hesitate to use Dennis for this piece of work.

Step 2 - Lift Tabs, Inserts, Jigging Cores, Laying up Shear Web, Installing Lift Tabs
Status: Completed 
Est Time: 0.00, Actual: 0.00
Est Cost: $ 0.00, Actual: $ 0.00
Date Completed: 04/01/2005

Nothing to do here.

Step 3 - Jigging and Bonding Sections
Status: Completed 
Est Time: 0.00, Actual: 0.00
Est Cost: $ 0.00, Actual: $ 0.00
Date Completed: 04/01/2005

Nothing to do here.

Step 4 - Spar Cap Layup
Status: Completed 
Est Time: 0.00, Actual: 0.00
Est Cost: $ 0.00, Actual: $ 0.00
Date Completed: 04/01/2005

Nothing to do here.

Step 5 - Applying Bottom Skin
Status: Completed 
Est Time: 0.00, Actual: 0.00
Est Cost: $ 0.00, Actual: $ 0.00
Date Completed: 04/01/2005

Nothing to do here.

Step 6 - Installing Foam for Elevator Hinges, Upper Spar Cap, and Upper Skin
Status: Completed 
Est Time: 0.00, Actual: 0.00
Est Cost: $ 0.00, Actual: $ 0.00
Date Completed: 04/01/2005

Nothing to do here.