Cozy MKIV: "Grey Lady" Updates Blog

05-01-2009

	05-25-2009: Trimming and Attach Tabs Over the weekend I removed the landing gear cover and sanded the foam down for a good, even fit. I then glassed the inside of the cover. To reinstall it, I 5-min epoxied some support strips across ...
	05-25-2009: Final Reinforcements Seems like a never-ending series of steps, but at least this one is in the bag! This weekend I used a slide hammer to remove the studs, and removed the gear from the plane. This technique worked great...
	05-21-2009: Rear seats almost done I had previously made the rear seat support panels as part of making the front seat sections. All I had to do today was glass them in their final curve. I did change one thing from the plans. They cal...
	05-21-2009: Inside Layup Shaping the inside of the landing gear cover was tricky because in some sections there was very little clearance around the gear itself. But its final shape is not very important so I just kind of "we...
	05-21-2009: First switch installed OK, it's a minor bit of progress but an important one to me. Until now I've kept all my switches and wires and such on a small temporary panel. This let me work on things without actually installing t...